home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19980901-19981211
/
000229_news@newsmaster….columbia.edu _Tue Oct 27 23:21:04 1998.msg
< prev
next >
Wrap
Internet Message Format
|
1998-12-10
|
3KB
Return-Path: <news@newsmaster.cc.columbia.edu>
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id XAA16546
for <kermit.misc@watsun.cc.columbia.edu>; Tue, 27 Oct 1998 23:21:00 -0500 (EST)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id XAA25051
for kermit.misc@watsun; Tue, 27 Oct 1998 23:20:59 -0500 (EST)
Path: news.columbia.edu!panix!nntprelay.mathworks.com!newsfeed.cwix.com!209.95.128.196!news-nyc.telia.net!ubnnews.unisource.ch!news.itu.ch!ties.itu.int!marsh
From: arthur marsh <marsh@ties.itu.int>
Newsgroups: comp.protocols.kermit.misc
Subject: Re: newbie question:atdt command works but not using dial command
Date: Wed, 28 Oct 1998 05:19:14 +0100
Organization: International Telecommunication Union (ITU)
Lines: 51
Message-ID: <Pine.OSF.4.03.9810280513540.1405-100000@ties.itu.ch>
References: <363441A7.90910EC@siemens.com.sg> <7126lf$lb7$1@apakabar.cc.columbia.edu> <36359FA8.B12A7FAD@siemens.com.sg>
NNTP-Posting-Host: ties.itu.ch
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
X-Trace: sanaga.itu.ch 909548369 174 156.106.192.33 (28 Oct 1998 04:19:29 GMT)
X-Complaints-To: abuse@itu.int
NNTP-Posting-Date: 28 Oct 1998 04:19:29 GMT
To: Muljawan Hendrianto <muljawan.hendrianto@siemens.com.sg>
X-Sender: marsh@ties.itu.ch
In-Reply-To: <36359FA8.B12A7FAD@siemens.com.sg>
Xref: news.columbia.edu comp.protocols.kermit.misc:9429
I have used the Motorola Codex 3265 and now have a Mtorola Codex 3266
running with Kermit 95. I ended up customising the initialisation strings
as there are different features disabled or enabled by telecommunications
requirements in different countries and practical problems like dial tone
not being detected on my exchange type.
If you send me the output of an at*st0 command I could make some
suggestions on your settings.
On Tue, 27 Oct 1998, Muljawan Hendrianto wrote:
> Frank da Cruz wrote:
>
> > :
> > This indicates a total failure to communicate with the modem. The
> > manual
> > goes into great detail about how to set up and troubleshoot modem
> > connections.
> >
> > You didn't show the sequence of commands you used. It should have
> > been:
> >
> > set modem type motorola-montana
> > set line /dev/ttyS1
> > set speed 38400
> > dial 97407554
> >
> > in that order; the order is important.
> >
> > A couple other hints:
> >
> > 1. Use "set dial display on" to monitor the dialog between Kermit and
> >
> > the modem.
> >
>
> Thanks Frank,
>
> After I did "set dial display on", I saw the dialog between Kermit and
> the modem.
> It seems that I init string is not working with my modem , since I don't
> use the motorola-montana. I did follow the step you mentioned above.
> My modem is Motorola Codex 3265, so it seems that I need to put in the
> right init-string.
> How can I do that?
>
> thanks,
> Muljawan
>